Showing all 5 results
Solar Photovoltaic Analyzer
-
Electrical Safety Installation Tester on Photo Voltaic System HT Italia Solar200
- Continuity of protective conductors with 200mA.
- Insulation with test voltages of 50, 100, 250, 500, 1000VDC.
- Tripping time of RCDs type A, AC, general and selective up to 500mA.
- Tripping current of RCDs type A, AC, general and selective up to 500mA.
- Impedance of Loop/Line P-N, P-P, P-PE, also with high resolution (0,1mOhm).
- Ipsc calculation.
- Optical/USB interface for PC connection.
-
Multifunction Instrument for Testing & Veryfying Single Phase Photovoltaic Installations HT Italia Solar I-V
- Testing on PV installation.
- I-V curve measurement.
- DC/AC TRMS Voltage.
- DC/AC TRMS Current.
- DC power.
- AC active power on single-phase systems.
- Solar irradiation [W/m2] with reference cell.
- Optical/USB port for PC connection.
-
Multifunction Instrument for Verification of I-V Characteristic of Photovoltaic Strings HT I-V400
- Measurement of output voltage from module/string up to 1000V DC.
- Measurement of output current from module/string up to 10A DC.
- Measurement of solar irradiation [W/m2] with reference cell.
- Measurement of environmental/module temperature, automatic or by means probe.
- Measurement of output DC and nominal power from module/string.
- Numerical and graphical display of I-V characteristic.
- Optical/USB port for PC connection.
-
Power Quality Analyzer for Single and Three Phase Photovoltaic Systems HT Italia Solar300N
- DC/AC TRMS (single-phase and three-phase) voltage and current measurement.
- DC/AC (single-phase and three-phase) power measurement.
- AC (single-phase and three-phase) energy measurement.
- Measurement of power factor (cosphi) single-phase and three-phase.
- Measurement of solar irradiation [W/m2].
- Recording of voltage and current harmonics up to the 49th.
- Recording of voltage anomalies (dips, peaks).
- Flicker analysis in compliance with standard EN50160.
-
Safety Tester for Photovoltaic Systems HT PVCHECK
- Safety test of PV installation.
- Continuity test on protective conductors with 200mA.
- Insulation test with test voltage of 250, 500, 1000VDC.
- DC voltage.
- DC current.
- DC Power.
- Solar irradiation [W/m2] with reference cell.