Showing 89–96 of 97 results
General Mechanical Product & Tools
-
Swivel Pick & Place Unit
Swivel P&P unit that supports various transports. Select from three series according to the application, such as inspection of electronic parts and battery assembly.
- High speed / high precision realized by combined operation of swivel / vertical drive.
- Ball spline is used in output shaft.
- Suppresses residual vibration even during high-speed rotation.
- Select from two types of operations, index operation and oscillating operation.
-
Thin Wide Angle Hand
Thin hand that allows wide angle 180° opening / closing. It is thin, space-saving and flexible and makes line configurations possible.
- With the wide angle, vertical movement during pick & place is unnecessary and positioning is easy.
- Strong gripping power with toggle mechanism.
- 2 proximity switches can be installed.
-
Universal Robots Certified Gripper 3-Way Finger Type
UR certified pneumatic grippers are customized for Universal Robots' collaborative robots. Easy installation with a dedicated common flange, and tool-less replacement with clamp ring has been realized.
- Attach the dedicated flange to the robot.
- Turn the clamp ring to attach the gripper.
- Connect the wiring connector.
- Mounting complete!.
- With the adoption of a common robot flange to the whole series, change in setup requires only replacing the gripper.
- The gripper can be replaced without tools and the simple clamp ring design can be set by hand.
- With the dedicated "CKD Pneumatic Gripper" software certified by Universal Robots, the teaching time can be greatly reduced with simple setting procedures and intuitive operation.
- High safety is achieved with an edgeless resin cover and a 360° visible indicator lamp.
- An optional directional control valve can be set. In addition, various air components required for driving the gripper are available at CKD.
-
Vacuum Pressure Control System
While maintaining the reliability of the conventional high vacuum valve, it has achieved pressure control that enables various processes.
-
Vacuum Switching Unit (20 Mm Width)
Burst air flow rate & vacuum switching unit with relief pressure adjustment needle.
- Pressure control is added to the conventional flow rate control for vacuum burst air to prevent workpieces from being blown away.
- Shortening of vacuum time is realized by providing a relief function in the vacuum burst circuit (function to relieve extra pressure).
- Three types of vacuum supply valve type, self-hold, normally open, and normally closed, are available.
- When vacuum is retained for long periods in particular, energy saving is realized by using a self-hold type which makes continuous energizing unnecessary.
- Since manifold is also available, reduced piping is possible.
- There are two types of pipe leadout directions, front side and rear side, which can be selected according to the installation location.
-
Valve For Process Gas
A new variation of valve for process gas that uses a metal diaphragm.
- It has been released as a general-purpose product with a forged body.
- Air operated and manual are available.
-
Y-Shaped Strainer
Removes foreign matter in water piping and protects the equipment.
- Easy to replace the mesh.