Showing 1–8 of 13 results
EMC & EMI Test
-
Fast Transient Burst Simulator NoiseKen FNS-AX3
- 4.8kV maximum peak voltage.
- 2MHz pulse repetition rate.
- Conforming to IEC/EN 61000-4-4 (Second Edition-2004).
- Reverse polarity per burst.
- Automatic ramp operation.
- Manual, IEC level and sequence modes.
-
High Voltage Lighting Surge Simulator NoiseKen LSS-F02
- Output voltage 15kV, current 7500A which can conduct breakdown resistibility test.
- 50% reduction of the output interval which can drastically reduce the test time.
- Touch-panel adopted for the easy test setting.
- Multi-languages for the easy operation processing available.
- Indicator which is linked with the test setting equipped.
- PC control available with the optional software.
- Emergency stop & "Interlock terminal" which secure the test operator equipped.
-
Impulse Noise Simulator EMC Testing NoiseKen INS-4020/ 4040
- INS-4020 (2kV) : 0.01 ~ 2.00KV ±10% with 50 ohm load, 10V step.
- INS-4040(4kV) : 0.01 ~ 4.00KV ±10% with 50 ohm load, 10V step.
- Automatic ramp operation for output voltage, phase angle and repetition period.
- Floating output.
- Coupling mode selection by plugging the supplied coaxial connector to the selected port.
- Easily changeable mercury relay unit.
-
Impulse Noise Simulator EMC Testing NoiseKen INS-AX2
- INS-AX2-220/250 : 0.01 ~ 2.00kV±10% at 0.01kV step Pulse output voltage.
- INS-AX2-420/450 : 0.01 ~ 4.00kV±10% at 0.01kV step Pulse output voltage.
- Floating output.
- 8 pulse widths installed: 10ns, 50ns, 100ns, 200ns, 400ns, 500ns, 800ns and 1000ns.
- Internal switchable terminators.
- Easily changeable and safety-interlocked outlet panel (EUT interface).
- 3 channels EUT fail input.
-
Lighting Surge Simulator NoiseKen LSS-6230
- Lightning Surge Simulator conforming to IEC61000-4-5 ed2 Standard.
- Ring wave conforming to ANSI/IEEE C62.45 available.
- Max. voltage 6.6kV output focusing on the practical use.
- Monitor terminal standard equipped so as for easy waveform pre-checking.
- Interlock built-in as the emergency stop function for safety.
-
PCB Boards Radiation Emissions Measurement System NoiseKen EPS-6000
- Measurable up to 8GHz in the frequency range.
- 4 axes (X, Y, Z, θ) measurements with minute step minimum 0.1m realized.
- Equivalent distance measurement to parts on PCBs even the heights are different.
- Composite figure of photo of the measured PCB and the measurement data realized.
- Rich magnetic field probes in the figures, sizes and Vertical/Horizontal directions.
- Versatile display for the measurement data as 2 dimensions, 3 dimension, and equiangular line realized.
-
Pulse 1, 2a Generator Automotive Transient Surge Simulator NoiseKen ISS-7610
- Pulse 1 and Pulse 2a generating unit.
- A built-in 60V/30A Coupling Network allows independent operation.
- Wide variety of selections of the output resistances Ri and Pulse Widths td and their combinations.
-
Pulse 2b, 4 Generator Automotive Transient Surge Simulator NoiseKen BP4610
- Pulse 2b and Pulse 4 generating unit.
- +-60V 10A DC - 150kHz built-In bipolar amplifier.
- Functions as the DUT power supply for testing with the other pulses.
- Upgradeable to 15A or 30A by use of an optional external power supply.