Close

Showing 9–13 of 13 results

Filter»

EMC & EMI Test

  • Pulse 3a, 3b Generator Automotive Transient Surge Simulator NoiseKen ISS-7630

    • Pulse 3a and Pulse 3b generating unit.
    • A built-in 60V/30A Coupling Network allows independent operation.
    • <3.5ns rise time pulse available.
    • Runs in pulse repetition frequencies sweep mode from 1 kHz to 100 kHz (ISS-7601 software required).
    Get Quotes

  • Pulse 5a, 5b Generator Automotive Transient Surge Simulator NoiseKen ISS-7650

    • Pulse 5a and Pulse 5b generating unit.
    • A built-in 60V/30A Coupling Network allows independent operation.
    • Capacitive - resistive (inductive) discharge circuitry in strict conformity with the standard and with the actual car environment.
    • Equipped with a programmable clip circuit that can produce Pulse 5b clipped waveform in steps of 0.1V without externally attaching a zener diode.
    • Pulse 5b clipped waveform is pre-eminent in smoothness.
    Get Quotes

  • RF Emission Radiation Precision Scanner NoiseKen EPS-3007

    • Provides an amplitude versus frequency plot for each antenna probe position and field intensity distribution map by a single scan.
    • Electric and magnetic fields are separately detected.
    • 3D graphical representation and zoom capability for a given area.
    • Comparison before and after a modification or improvement.
    • Scanning by a single antenna probe to minimize error between each measurement point.
    • 3GHz maximum frequency response (option).
    • Standard included three kinds of antenna probes (Probe A, Probe B and Probe C).
    Get Quotes

  • Source-Voltage Dip and Swell Simulator NoiseKen VDS-1007/ 2007

    • VDS-1007 : 1kVA Power.
    • VDS-2007 : 2kVA Power.
    • Enable to enrich EMC preliminary tests with the remote control as an AC stabilizing power source.
    • Enable IEC61000-4-11/13/14/28 precompliant tests.
    • Usable to be power source for IEC61000-3-2-2 precompliant measurement.
    Get Quotes

  • Voltage Dip and Swell Waveforms Simulator NoiseKen VDS-2002

    • Conforming to IEC 61000-4-11.
    • Fully compliant with all the test generator requirements of IEC standard.
    • One unit solution for dip, swell, interruption and variation tests up to 16A 290V single phase AC.
    • Interruption test up to 16A 125V DC (*).
    • Two motor-driven transformers approach enables switching between any voltages (*).
    • Preset IEC test levels 0%/40%/70%/80% plus additional 120%.
    Get Quotes