Showing 9–16 of 19 results
LCR Meter / Impedence Analyzer
-
IMPEDANCE ANALYZER IM7585
- For R&D and high volume production of ferrite chip beads and chip inductors.
- Comparator and Contact Check.
- |Z|, L, C, R testing.
- 1MHz to 1.3GHz.
- 0.5ms test speed, ±0.65% accuracy, 0.07% variability.
- Measure LCR and conduct frequency sweeps simultaneously.
-
IMPEDANCE ANALYZER IM7587
- For R&D and high volume production of ferrite chip beads and chip inductors.
- Comparator and Contact Check.
- |Z|, L, C, R testing.
- 1MHz to 3GHz.
- 0.5ms test speed, ±0.65% accuracy, 0.07% variability.
- Measure LCR and conduct frequency sweeps simultaneously.
-
LCR HiTESTER 3511-50
- Integrate into automated production lines.
- On-board testing of capacitors and coils.
- |Z|, L, C, R testing.
- 120 Hz or 1 kHz.
- 5 ms test speed, ±0.08% accuracy.
- High-speed comparator.
-
LCR METER IM3523
- Economical LCR Meter designed for production lines.
- Continuous testing over mixed measurement conditions, including C-D(120 Hz) and ESR(100 kHz).
- Comparator and BIN functions.
- |Z|, L, C, R testing.
- 40 Hz to 200 kHz.
- 2 ms test speed, ±0.05% accuracy.
- Comparator and BIN functions.
-
LCR METER IM3533
- Built-in low impedance high precision mode for testing low inductance or ESR of aluminum electrolysis capacitance.
- Turn ratio, mutual inductance and inductance difference measurements of transformers and coils.
- |Z|, L, C, R testing.
- 1 mHz to 200 kHz.
- 2 ms test speed, ±0.05% accuracy.
- Transformer measurement mode.
-
LCR METER IM3536
- Industry-standard LCR meter meeting the widest range of applications.
- |Z|, L, C, R testing.
- DC, or 4 Hz to 8 MHz (up to 10MHz special order available).
- 0.5 ms test speed, ±0.05% accuracy.
- Accuracy guaranteed range from 1 mΩ.
-
PINCHER PROBE L2001
- 2-wire probe for LCR testing of small chip components.
- DC to 8MHz, 50Ω termination.
- Tip electrode spacing: 0.3 to 6 mm.
- Measurable sample size: 0603 (EIA).
-
SMD TEST FIXTURE IM9100
- High-precision 4-wire testing of advanced electronic components.
- Direct-connection testing.
- Test SMDs with electrodes on the bottom.
- DC to 8MHz.
- Measurable sample sizes: 01005 to 0402 (EIA).