Showing 137–144 of 767 results
Testing & Measuring
-
Electric & Magnetic Field Generating Transmission Line 10 kHz..100 Mz TDK EFG-02
- 10kHz – 100 MHz operating range.
- High power field generator.
- Up to 500 V/m RSM.
- Low VSWR.
- Adjustable height for optimizing performance.
-
Electric & Magnetic Field Generator 10 kHz..100 Mz TDK EFG-03
- 10kHz – 100 MHz operating range.
- High intensity field generator.
- Generates greater than 500 V/m.
- Low VSWR.
- Adjustable height for optimizing performance.
-
Electrical Safety Analyzer Fluke Biomedical 601 Pro
- EN60601-1, EN601010-1, and AAMI test loads (user selectable).
- Multiple enclosure-leakage points.
- Multiple patient-applied-part types.
- Power ON/OFF delay.
- DC only for patient- and auxiliary-leakage tests.
- User-programmable test sequences.
-
Electrical Safety Analyzer Fluke Biomedical DALE 601E
- Small, lightweight, self-contained portable instrument.
- Master range meter delivers accurate measurment for each test.
- Accurate test measurements with 4-wire Kelvin bridge.
- Test method complies with AAMI load per ANSI/AAMI ES1-1993 or IEC601-1.
- Leakage Current can be measured in Open/Closed Neutral, Normal/Reversed Polarity and Open/Closed Ground.
- All Leakage Current measurements are displayed directly in µAmps.
- Broad range of external measurements.
- Five (5) Universal EKG Lead Connectors.
- The DALE601E is designed for 230 V operation.
-
Electrical Safety Analyzer for Medical Rooms Fluke Biomedical ESA612
- Portable, ergonomic, lightweight, and easy to use.
- Large, easy-to-read display with adjustable contrast.
- Human-factors-designed user interface.
- Tilt stand design for stand-up testing in field environments.
- Five applied parts jacks and easy ECG snap connection.
-
Electrical Safety Analyzer for Medical Rooms Fluke Biomedical ESA620
- Compliance with multiple standards.
- Three test loads.
- Expanded leakage ranges through 10,000 µA.
- AC only, DC only and True RMS leakage readings.
- 100 % and 110 % mains voltage for mains on applied part (lead isolation) test.
- 20 A equipment current.
-
Electrical Safety Installation Tester on Photo Voltaic System HT Italia Solar200
- Continuity of protective conductors with 200mA.
- Insulation with test voltages of 50, 100, 250, 500, 1000VDC.
- Tripping time of RCDs type A, AC, general and selective up to 500mA.
- Tripping current of RCDs type A, AC, general and selective up to 500mA.
- Impedance of Loop/Line P-N, P-P, P-PE, also with high resolution (0,1mOhm).
- Ipsc calculation.
- Optical/USB interface for PC connection.
-
ELECTRODE RESISTANCE MEASUREMENT SYSTEM RM2610
- Resistance measurement system to analyze the surface of the LIB electrode sheets in order to improve battery quality at the component level.
- For research and development of Li-ion batteries.
- Isolates and quantifies composite layer resistance and interface resistance in positive- and negative-electrode sheets.