Showing 185–192 of 767 results
Testing & Measuring
-
Fluke 714B Thermocouple Calibrator
- measure and simulate (17) different thermocouple types and millivolts.
- Measure 4 to 20 mA signals while simultaneously sourcing a temperature signal.
- Configurable 0 % and 100 % source settings for quick 25 % linearity checks.
- Linear ramp and 25 % step auto ramp based on 0 % and 100 % settings.
- Dual inputs and backlit display for easy interpretation of measurements.
- Power down settings remembered at power up for easy restart of tests.
- 1-year and 2-year specifications and traceable certification of calibration.
-
Fluke Hart Scientific 1594A 1595A Temperature, Thermometer, Thermistor Calibrator
- Calibrate SPRTs, PRTs, RTDs and thermistors (0 Ω to 500 kΩ).
- Accuracy as good as 0.06 ppm (0.000015 °C).
- “Ratio Self-Calibration” verifies and calibrates resistance ratio accuracy.
- Automatic zero-power measurements calculate thermometer probe self-heating.
- Temperature-controlled internal reference resistors.
-
Fluke Networks AirCheck Frontline Troubleshooting Kit ACK-LRPRO
-
FLYING PROBE TESTER FA1240-6x
- High-speed 4-wire resistance testing of populated boards.
- Quickly complete programs that take into account component height.
- 4 arms, high-speed testing at up to 0.025 sec./step.
- 510 × 460 mm testing area.
- Automatic calculation of arm interference.
-
FLYING PROBE TESTER FA1283
- Horizontal-loading double-sided flying probe tester.
- Inspection from general bare boards to fine and high density substrates such as flexible substrates and CSP.
- 4 arms, max. 100 points/sec.
- Minimum 15 μm × 15 μm probing precision.
-
FLYING PROBE TESTER FA1811
- Flying probe test for package board testing.
- Achieve both high precision contact and high-speed probing.
- Double test method delivers an operation rate of 100%.
- 2 arms, supports test fixture.
- 10 μm × 10 μm probing precision.
- 40 μm minimum pitch.
-
FLYING PROBE TESTER FA1816
- Horizontal-loading single-sided flying probe bare board inspection tool.
- High-speed pattern testing using the capacitive measurement method.
- 2 arms, max. 100 points/sec.
- 16 μm × 16 μm probing precision.
- 50 μm minimum pitch.
-
FLYING PROBE TESTER FA1817
- Vertical double-sided flying probe tester for bare board inspections.
- Open via defect detection with low resistance measurement.
- Detect pattern shape abnormality and voids with super insulation resistance testing.
- 4 arms, max. 67 points/sec.
- 20 μm × 20 μm probing precision.
- 50 μm minimum pitch.