Showing 241–248 of 767 results
Testing & Measuring
-
IMPEDANCE ANALYZER IM3570
- Superior low-impedance repeatability.
- Meet applications in low-ESR measurement.
- |Z|, L, C, R testing.
- 4 Hz to 5 MHz.
- 0.5 ms test speed, ±0.08% accuracy.
- Single device solution for high speed testing and frequency sweeping.
-
IMPEDANCE ANALYZER IM7580A
- For high volume production inspections and research and development.
- Comparator and contact check.
- |Z|, L, C, R testing.
- 1MHz to 300MHz.
- 0.5ms test speed, ±0.72% accuracy.
- Measure LCR and conduct frequency sweeps simultaneously.
-
IMPEDANCE ANALYZER IM7581
- For high volume production of ferrite chip beads and chip inductors.
- Comparator and contact check.
- |Z|, L, C, R testing.
- 100kHz to 300MHz.
- 0.5ms test speed, ±0.72% accuracy.
- Measure LCR and conduct frequency sweeps simultaneously.
-
IMPEDANCE ANALYZER IM7583
- For high volume production of ferrite chip beads and chip inductors.
- Comprehensive contact check via DCR testing, Hi-Z reject or waveform judgment.
- |Z|, L, C, R testing.
- 1MHz to 600MHz.
- 0.5ms test speed, ±0.65% accuracy.
- Measure LCR and conduct frequency sweeps simultaneously.
-
IMPEDANCE ANALYZER IM7585
- For R&D and high volume production of ferrite chip beads and chip inductors.
- Comparator and Contact Check.
- |Z|, L, C, R testing.
- 1MHz to 1.3GHz.
- 0.5ms test speed, ±0.65% accuracy, 0.07% variability.
- Measure LCR and conduct frequency sweeps simultaneously.
-
IMPEDANCE ANALYZER IM7587
- For R&D and high volume production of ferrite chip beads and chip inductors.
- Comparator and Contact Check.
- |Z|, L, C, R testing.
- 1MHz to 3GHz.
- 0.5ms test speed, ±0.65% accuracy, 0.07% variability.
- Measure LCR and conduct frequency sweeps simultaneously.
-
Impulse Noise Simulator EMC Testing NoiseKen INS-4020/ 4040
- INS-4020 (2kV) : 0.01 ~ 2.00KV ±10% with 50 ohm load, 10V step.
- INS-4040(4kV) : 0.01 ~ 4.00KV ±10% with 50 ohm load, 10V step.
- Automatic ramp operation for output voltage, phase angle and repetition period.
- Floating output.
- Coupling mode selection by plugging the supplied coaxial connector to the selected port.
- Easily changeable mercury relay unit.
-
Impulse Noise Simulator EMC Testing NoiseKen INS-AX2
- INS-AX2-220/250 : 0.01 ~ 2.00kV±10% at 0.01kV step Pulse output voltage.
- INS-AX2-420/450 : 0.01 ~ 4.00kV±10% at 0.01kV step Pulse output voltage.
- Floating output.
- 8 pulse widths installed: 10ns, 50ns, 100ns, 200ns, 400ns, 500ns, 800ns and 1000ns.
- Internal switchable terminators.
- Easily changeable and safety-interlocked outlet panel (EUT interface).
- 3 channels EUT fail input.