Showing 57–64 of 767 results
Testing & Measuring
-
BATTERY TESTER BT3554 (Built-in Bluetooth® wireless technology)
- Most popular portable battery tester for large lead-acid and UPS batteries.
- Measure and save data in 2 seconds.
- Comparator function for quick pass/fail/warning decision.
- Bluetooth(R) wireless communication.
- AC, 1kHz testing source.
- 1μΩ resolution at 3mΩ range.
- ±6V to ±60V.
-
Biconical Metrology Antenna for Calibration 20..600 MHz TDK MBA-2060
- Frequency Range: 20 MHz to 600 MHz.
- VSWR: 2.5:1 average.
- Polarization: Linear.
- Feedpoint Impedance: 50 ohms nominal.
- Improved balun provides superior patterns and balance.
- Improved biconical element design.
-
Broadband Horn Antenna 1..18 GHz TDK HRN-0118
- Frequency Range: 1-18 GHz.
- VSWR: <1.5:1 average.
- Polarization: Linear.
- Power Handling: 500W.
- Feedpoint Impedance: 50 ohms (nominal.
-
BYPASS DIODE TESTER FT4310
- Innovative bypass diode tester for photovoltaic systems to vastly improve work efficiency.
- Send data to mobile device via Bluetooth(R).
- Easily inspect bypass diodes for open and short-circuit faults even in broad daylight.
- Easily test using the strings in the junction boxes.
-
C HiTESTER 3504
- Capacitance testing with voltage dependency characteristics through the use of constant voltage testing (CV).
- Detect contact failure on all 4 terminals for increased reliability.
- High speed inspection of Multi-Layer Ceramic Capacitors (MLCC) on taping machines.
- C, D (tan δ), large capacitance MLCC testing.
- 120Hz or 1kHz.
- 2 ms test speed, ±0.09% accuracy.
-
C METER 3506-10
- High speed testing of ceramic capacitors on production lines.
- Integrate with automatic taping machines and sorters for production of MLCC (multi-layer ceramic capacitors).
- C, D, (tan δ), Q, low capacitance testing.
- 1 kHz or 1 MHz.
- 1.5 ms test speed (1MHz), ±0.14% accuracy.
-
CABLE HEIGHT METER
The CHM Series of Cable Height Meters utilize ultrasonic sound to determine the height of up to six overhead cables and wires. The instruments are designed to address specific measuring requirements on cables up to 75 feet (23 m). The CHM600 (C/N 659600) and CHM600E (C/N 659600E) are designed primarily for power cable applications, while the CHM2000 is designed for telecommunication applications.
- Dramatically reduces measuring time.
- Inherently safe.
- Designed for ease-of-use.
- Hand-held portability.
- Calibration and maintenance free operation.
- No physical connection to cables or wires.
- Measures the height of up to six overhead cables.
-
Cable Reflectometer for fault location Megger
- ARMslide technology with 15 traces in one ARM shot.
- ProRange for optimised display of distant details.
- Support of all existing prelocation technologies.
- Automatic adjustment and display of cable end and fault.
- Compatible with all fault location systems.