Showing 33–40 of 97 results

Filter»

General Mechanical Product & Tools


  • Electric Shuttle Mover


    Transport system that enables single-axis 2D transport with one motor.

    • Long stroke of up to 20 m. Multipoint positioning / Soft start & stop possible.
    • This is a motorless specification.

  • Electronic Pressure Switch With Digital Display


    A compact 1-screen 2-color display pressure switch of □31 mm. Compatible with protection degree IP65. (Piping connection: Female thread was added.)

    • The current pressure state is displayed in two colors of green and red.
    • Pressure normal / abnormal can be judged at a glance.
    • If one master is set for multiple usage, the rest are copied using the copy function to reduce procedures and prevent setting errors.
    • It has an IP65 protective structure and can be installed even in places where water gets splashed.
    • Pressure unit switching function is available as an option to support overseas use.
    • Since the cable uses a connector to connect, it is possible to install a pressure switch after electric wiring.

  • Filter / Regulator


    New Series using integrated filter and regulator, 5μm elements for dust removal, and 0.3μm elements for tar removal.

    • This long-life element filters out harmful dirt and foreign matter, etc., from air.
    • This dedicated element effectively separates tar and carbon. (Non-regenerable).
    • This element incorporates CKD’s original chemical fiber structure (patent pending), which has a rough surface and gradually becomes finer toward the interior.
    • Clogging is greatly reduced, and the element life is greatly extended, free of concerns regarding rust.

  • Fine Level Switch


    Detects with high accuracy the level of fluids including pure water, acids, alkalis and solvents, outputting electrical signals.


    • Fine Speed Fan Rotary Actuator


      Vane type rotary actuator that realizes small size, light weight, high torque and minimal air leakage.

      • Original seal structure realizes the industry's smallest air leak.
      • With the original seal structure, there is no stick slip and smooth low speed operation is realized.
      • Low speed range 1.5 seconds / 90°.
      • 1.5 times higher torque compared with conventional models in a compact body.
      • The bore sizes are abundant from Φ12 to Φ63, the fluorine packing specifications (RCS2-T2) with improved environmental resistance, the sputter adhesion prevention type (RCS2-G4) optimal for use in welding environments, etc., are all rich in variety for use in wide applications.

    • Fitting


      Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.

      • V-shaped packing seal to realize smooth insertion and accurate sealing.
      • Smooth insertion and secure sealing.
      • Freely rotating elbow union to make piping and removal work easier.
      • White body blends into working environment. Electroless nickeling used for copper alloy sections.
      • The tube can be connected to the pipe fitting by pushing the tube in.
      • The chuck bracket acts in the direction in which the tube is dislocated.
      • The push ring evenly pushes and opens the chuck, so the tube is completely released from the chuck and can be removed smoothly.
      • Teflon resin is coated on the thread part.
      • Sealing tape wrapping is not needed, reducing work hours.
      • An even seal is created and there is no need to worry about leakage, etc.

    • Floating Fitting


      This floating fitting eliminates misalignment and parallelism defects during cylinder mounting, and realizes smooth rod actuation.

      • Easy centering, parallelism alignment.
      • Compact and high tensile / compression force permissible.
      • With dust cover.
      • Filled with lubricant and not requiring lubrication.
      • Oscillating angle ±5°.

    • Flow Rate Control Type Weir Diaphragm Valve (Japan Only Release)


      This flow rate control valve has sanitary specifications for high cleanability and liquid replacement. It achieve high control required in pharmaceutical manufacturing processes, such as infusions that require sterility and biologically high-functional food manufacturing processes.

      • Reproduce complicated valve operation control with simple settings and operation.
      • Arbitrary parameters can be preset in memory.(Up to 6 patterns).
      • Presets can be switched by an external signal.
      • Supports proportional control of flow rate with analog input signal.
      • Seal structure that prevents accumulation of liquids to ensure sterilization.
      • SIP and CIP are also supported.