Showing 57–64 of 97 results
General Mechanical Product & Tools
-
Manual Valve For Chemical Liquids
New standard type of manual valve for chemical liquids. It is an high-end model covers wide range of main pressure, temperature and liquids. Reliability is increased adding the feature of overtightening prevention mechanism, Malfunction prevention lock-ring.
-
Mechanical Valve
A detector is used to confirm the cylinder position and the presence of material during control.
- Equivalent to a vertical limit switch for electric components and operates with mechanical detection.
- Large 3-port valve for pneumatic control.
- Equivalent to a micro switch for electric components and operates with mechanical detection or manual operation.
- Compact 3-port valve for pneumatic control.
- Equivalent to a compact limit switch for electric components and operates with mechanical detection.
- Medium 3-port valve for pneumatic pressure.
-
Medium Main Line Filter
This is a mainline filter that pursues energy savings, low pressure loss, and long life. The adoption of a 360-degree high visibility indicator helps to grasp the maintenance period and reduce the number of element replacement steps.
- Minimal pressure loss is realized by adopting a pleated structure element with a large filtration area.
- Minimal pressure loss through reduced clogging is achieved by using borosilicate media (with hydro- and oleophobic properties).
- A 360° high-visibility indicator, enabling differential pressure checking from all directions, is equipped as standard. (P/M types).
- The push-fit element makes mounting easy.
-
Medium Pressure Gas Combination Valve
The medium pressure (0.3MPa) governor is integrated with the secondary side shut-off valve to significantly reduce pressure loss. Compared with the conventional product (TAC-25), the flow rate at the same differential pressure is increased by 300%! Stable pressure control is realized even at high flow rates.
- Flow rate: about 3 fold. Face to face: 20% reduction. Ratio compared to our conventional product (TAC-25).
- Port size: 40A (flange).
- Select secondary orifice Ø15, Ø25, Ø40.
- Contributes to the stabilization of secondary flow rate.
- Hydraulic drive, slow open / quick shut.
- Stable pressure adjustment is possible even at high flow rates.
- Possible to check valve opening.
-
New Handling System
New handling system with small part transfer kit saves design time with flexible modular configuration.
- Flexible combinations according to the application.
- It is possible to construct a simplified system, assembled as easily as a plastic model.
- Drive part of X-axis module uses CKDs rodless cylinder SRL3.
- Integrated air ports for piping enable easy assembly even in narrow spaces.
- The compact design reduces installation space by half compared to general cylinders, since a rodless cylinder is used.
- X-axis, Z-axis, or attachment can be selected according to the application.
- LM guide with retainer SHS is installed, improving maintainability.
- Lubrication is not required for the long term, and the factory environment.
-
Nitrogen Gas Extraction Unit
It easily separates high-purity nitrogen from compressed air necessary for antioxidant and explosion-proof applications. A lineup of four new models makes it even easier to select the optimum model from 21 types. A lineup of NSU dedicated in-line sensors is also available, making constant monitoring of the flow rate possible.
- Three new NSUs and one NS models have been added. Optimal models can be selected from a total of 21 types.
- A lineup of NSU dedicated flow rate sensors.
- Nitrogen gas flow rates can be monitored constantly.
- Easily purifies nitrogen gas without using a cylinder or large equipment.
- Generates a nitrogen-enriched gas by utilizing a hollow fiber separation membrane that easily transmits oxygen.
- Reduced piping: Long piping work is unnecessary since it can be installed near equipment.
- Reduced processes / space: We propose the optimum system according to the required flow rate. Contributes to reduced procedures and space.
- The cylinder does not need remaining amount management, replacement, or refilling.
- The only required maintenance cost is electricity for the air compressor.
- Component replacement is possible without disassembling the piping.
-
Parallel Cam Unit Standard Type
Index unit with parallel cam mechanism.Indexable from 1 to 8 segments and ideal for pitch feed of chain conveyor.
- Suitable unit for fewer indexes with 1, 2, 3, or 4 index segments and parallel I/O axes.
- Demonstrates power in long pitch feed drive of conveyors and roll feeders.
- Oscillating cam operation up to oscillation angle of 45° is possible.
- There are mounting taps on all six surfaces of the housing, with 6 mounting orientation positions.
-
Pencil Shaped Cylinder
The lightest miniature series with the smallest bore size (φ6 to φ16) among general purpose cylinders. Space saving with compact standard switch ”T Series”. Compatible with the discontinued conventional product SCP*2 Series.
- Miniature bore size φ6, φ10, φ16.
- Total length is also short in pursuit of compactness.
- Height is reduced by half with compact cylinder switch ”T Series”.